Product ID:D.E.R. (R) 324 EPOXY RESIN PC19242
MSDS Date:03/20/1988
FSC:8040
NIIN:00-843-7873
MSDS Number: BKJQL

Emergency Phone: 517-636-4400

Info Phone: 517-636-4400

Cage: EO044

Telephone: 517-496-4388

Cage: 71984

REACTION PRODUCTS OF EPICHLOROHYDRIN AND BISPHENOL A

CAS: 25085-99-8

Fraction By Weight: 83%

ALKYL GLYCIDYL ETHER

CAS: 68609-97-2

Fraction By Weight: 17%

LD50 LC50 Mixture:LD50 ORAL 2000 MG/KG RAT
Health Hazards Acute and Chronic:EYE: MAY CAUSE SLIGHT TRANSIENT
(TEMPORARY) EYE IRRITATION. CORNEAL INJURY IS UNLIKELY. SKIN
CONTACT: HAS CAUSED ALLERGIC SKIN REACTIONS IN HUMANS. PROLONGED
EXPOSURE NOT LIKELY TO CAUSE SIGNIFICANT S KIN IRRITATION. SKIN
ABSORPTION: A SINGLE PROLONGED EXPOSURE IS NOT LIKELY TO RESULT IN
THE MATERIAL BEING ABSORBED *
Effects of Overexposure:*THROUGH SKIN IN HARMFUL AMOUNTS. THE DERMAL
LD50 HAS NOT BEEN DETERMINED. INGESTION: INGESTION OF LARGE AMOUNTS
MAY CAUSE INJURY. INHALATION: POSSIBLE IRRITATION AT HIGH
TEMPERATURES.

First Aid:EYES: IRRIGATE IMMEDIATELY WITH WATER FOR AT LEAST 5 MINUTES.
SKIN: WASH OFF IN FLOWING WATER OR SHOWER. INGESTION: INDUCE
VOMITING IF LARGE AMOUNTS ARE INGESTED. CONSULT MEDICAL PERSONNEL.
INHALATION : REMOVE TO FRESH AIR IF EFFECTS OCCUR.CONSULT A
PHYSICIAN.

Flash Point Method:PMCC
Flash Point:350F,177C
Extinguishing Media:FOAM, CO2, DRY CHEMICAL. *70F BASED ON ALKYL
GLYCIDYL ETHER
Fire Fighting Procedures:WEAR POSITIVE PRESSURE SELF-CONTAINED
BREATHING APPARATUS DURING FIRE-FIGHTING.

Spill Release Procedures:SOAK UP IN NON-REACTIVE ABSORBENT MATERIAL OR
SCRAPE UP. THE RESIDUE CAN BE REMOVED WITH HOT, SOAPY WATER. USE OF
METHYLENE CHLORIDE, ACETONE OR AROMATIC SOLVENTS IN CLEAN UP POSES
A DISTINCT HAZARD A ND THEREFORE, SHOULD BE AVOIDED.

Handling and Storage Precautions:PRACTICE CAUTION AND GOOD PERSONAL
CLEANLINESS TO AVOID SKIN AND EYE CONTACT. AVOID BREATHING VAPORS
OF HEATED MATERIAL.

Respiratory Protection:NO RESPIRATORY PROTECTION SHOULD BE NEEDED. IF
RESPIRATORY IRRITATION IS EXPERIENCED, USE AN APPROVED
AIR-PURIFYING RESPIRATOR.
Ventilation:GOOD GENERAL VENT SHOULD BE SUFFICIENT FOR MOST CONDITIONS.
LOCAL EXHAUST VENT MAY BE NECESSARY FOR SOME OPERATIONS.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES OR CHEMICAL GOGGLES
Other Protective Equipment:WEAR CLEAN, LONG-SLEEVED, BODY-COVERING
CLOTHING. USE PROTECTIVE CLOTHING IMPERVIOUS TO THIS MATERIAL.
Supplemental Safety and Health
THIS PRODUCT IS AN IMMEDIATE HEALTH HAZARD.

HCC:N1
Boiling Pt:B.P. Text:300F,149C
Vapor Pres:0.06 MM *
Spec Gravity:1.11
Solubility in Water:NONE
Appearance and Odor:CLEAR (LIGHT YELLOW) LIQUID OF LOW VISCOSITY; FAINT
EPOXY ODOR.

Stability Indicator/Materials to Avoid:YES
BASE
Stability Condition to Avoid:EXCESSIVE HEATING OVER LONG TIME PERIODS.
FREEZING MAY CAUSE TEMP HAZINESS. FIRE CONDITIONS INCREASE
VISCOSITY.
Hazardous Decomposition Products:UNDER CONDITIONS OF IMPERFECT
COMBUSTION AND/OR PYROLYSIS VARIOUS PHENOLIC COMPOUNDS CO AND/OR
CO2 MAY BE EVOLVED.

Waste Disposal Methods:BURN IN ADEQUATE INCINERATOR OR BURY IN APPROVED
LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.